Protect your boat's hull from damage with these inflatable boat fenders. Neoprene covers won't mark or scratch your hull. Reinforced straps on each end let you deploy them vertically or horizontally. Inflates quickly and stores easily.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this set of inflatable boat fenders. These are inflatable PVC utility fenders that will hang from your boat to prevent damage to your hull. These will deflate for easy storage in the included mesh bag. And so we've got the marine air valve here on the top. I'll switch to a closer view so you can see that a little bit better.
So we've got that little yellow button in the middle, that we can push and it will start deflating. So very easy to work with and it will deflate very quickly for us. So as we want to create some more room in our boat, we can take these down and then they will roll up to provide that easy storage for us. So once we have it rolled up, we can push that button again to make sure we're getting all the air out of it. And then we can put it in the included mesh bag.
This bag is gonna be big enough for both the fenders and our air pump and ropes there, so we'll make it very easy to get stored. And then to air it back up when we're ready to do so, we can just take the included pump, twist it in place there on that marine air valve. And this pump is a dual action hand pump. So it's going to pump air in when we pull out and when we push in. So it's going to fill this up very quickly for us.
(air pump whooshing) (air pump whooshing continues) We will air up to three PSI. We can pop that out. And then we do have this little cover to make sure that we're not going to accidentally deflate it there. So this will help to cushion impacts with docks, mooring, buoys, and other boats. The both of these fenders are about 35 inches long and 10 inches wide.
So they are going to be great for your 30 to 40 foot long boats. If you do have a 24 to 32 foot long boat, we also have smaller inflatable boat fenders for your application, so you can find those here at etrailer.com using the part number you see on the screen there. We are going to have these reinforced line straps that will allow you to deploy these vertically or horizontally. And we also have the quick drying black neoprene covers that will help prevent scuffs and reduce squeaking when docked. We've got the little draw strings there at the the top to make sure we've got a nice snug fit. And these will also provide UV protection for the fenders. And so all together, we're going to get two of these inflatable PVC fenders. Two of the neoprene sleeve covers. Two ropes with the stitched loops so that we can get these put out of our boat, tied up to where we need them to be. We'll also get the quick inflation hand pump that's got the hose that removes, for easy storage. And then of course, the mesh storage bag to keep it all stored and put together so we don't lose any of the components while we have it stored away. So a really nice way to have something on hand that you can put out if you are gonna be meeting up with another boat or if you're gonna be docking in a temporary location. You can pull these out, air them up, get them out there to protect your boat, and then easily deflate them so that they're not taking up a whole lot of space. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.